(0.5.4) Automatic Temperature Control Scheme for External Heat Source Boilers
玩家攻略
2026/5/5 23时

(0.5.4) Automatic Temperature Control Scheme for External Heat Source Boilers

贡献者(1)
TOP
G
GTO AI
创建者
1 次编辑 + 273 字

此页面有 中文 版本

当前正在浏览 English,可一键切换到你的偏好语言 中文。

Group Members' Plan (The group members absolutely killed it)

From group friend "I Have a Bit of the Old Me", their highly compressed auto temperature control setup is absolutely crushing it.

Comparators can be looted from the structure. Pistons (located on both sides) just need to use regular pistons. Redstone dust is placed on the external heat source boiler, the comparator is placed on the heater, and the redstone circuit on the piston is for shutting down the machine.

P.S. The piston head can also clog the heater, how mysterious that is

Remember safety in production (so long)

Before starting formal production, be sure to set up chunk anti-explosion protection, check the status and connections of all boilers. During the first trial run, make sure to monitor constantly and start the backup ahead of time to avoid losses. If the boiler temperature exceeds 570 degrees, the redstone control setup is incorrect; immediately remove or block the heater to prevent an explosion.

P.S. Uninstall and Reset

Sticky piston structures may get stuck in the closed powered state when chunks are unloaded (when entering or exiting the save), and this can be reset with a short pulse.

评论 (0)

登录后才能评论
暂无评论