AE Order Automation in Front of the Magic Line Large Machine

Considering that crafting large magical machines requires manually preparing a large quantity of materials, it is a good choice to first set up basic automation to manufacture these large machines. Here, we have selected commonly used magic-side crafting recipes for automation. Better automation methods may exist, and discussions are welcome.

1. Mana Pool Automation (Mana Steel, Mana Diamond, Mana Pearl, etc.)

Build as shown in the diagram, where the Item Collector can be replaced with a Backpack (Magnet Upgrade) and filter the products.

Leave one empty grid between the lattice crate and the mana pool to prevent products from flying around, you can surround the area with glass or similar materials (leave one grid for mana input)

Write the corresponding template:

2. Spirit Gate Trading

Build as shown in the diagram: attach the template supply block to a dispenser, detect items with a comparator, then use a piston to push a pair of face-to-face observers to form a high-frequency clock.

Filtered output from the Item Collector. Be careful not to get too close to the mana pool automation, otherwise thrown materials such as mana steel may be sucked away.

Block the back of the Elf Gate with blocks to prevent the products from flying away.

3. Rune Altar Automation

Build as shown in the diagram. Mechanism: The template sends materials to the container, Living Rock is sorted into the upper dispenser, the remaining materials are sent to the lower dropper which is continuously triggered by a floating hourglass, delivering the materials to the Rune Altar. Input magic power into the front of the Rune Altar; once fully charged, it can emit a 2-block redstone signal via a comparator. Use a pulse gate to convert this into a pulsed signal (you can also replace it with a repeater). Launch Living Rock and use the Forest Staff with the dispenser.

Note: The hopper to the left of the Item Collector is required, and the Item Collector uses a Small Tin Item Pipe for output; automatic output must not be enabled. These two steps are used to create a delay, as the Runic Altar has an internal cooldown after completing one synthesis. If items are immediately dispensed at this time, they will drop out and cause a bug.

4. Automation of Novice Magical Arts Enchanting Chamber and Infusion Chamber

Just adjust the priority using the AE subnet + storage bus